Commissioning of the CMS magnet

Campi, D.; Cure, B.; Gaddi, A.; Gerwig, H.; Herve, A.; Klyukhin, V.; Maire, G.; Perinic, G.; Bredy, P.; Fazilleau, P.; Kircher, F.; Levesy, B.; Fabbricatore, P.; Farinon, S.; Greco, M.

Статья опубликована в высокорейтинговом журнале

Информация о цитировании статьи получена из Web of Science, Scopus
Статья опубликована в журнале из списка Web of Science и/или Scopus
Дата последнего поиска статьи во внешних источниках: 18 июля 2013 г.

Авторы: Campi Domenico, Cure Benoit, Gaddi Andrea, Gerwig Hubert, Herve Alain, Klyukhin Vyacheslav, Maire Gilles, Perinic Goran, Bredy Philippe, Fazilleau Philippe, Kircher Francois, Levesy Bruno, Fabbricatore Pasquale, Farinon Stefania, Greco Michela
Журнал: IEEE Transactions on Applied Superconductivity
Том: 17
Номер: 2
Год издания: 2007
Издательство: Institute of Electrical and Electronics Engineers
Местоположение издательства: Piscataway, NJ, United States
Первая страница: 1185
Последняя страница: 1190
DOI: 10.1109/TASC.2007.897754
Аннотация: CMS (compact muon solenoid) is one of the large experiments for the LHC at CERN. The superconducting magnet for CMS has been designed to reach a 4 T field in a free bore of 6 m diameter and 12.5 m length with a stored energy of 2.6 GJ at full current. The flux is returned through a 10 000 t yoke comprising of five wheels and two end caps composed of three disks each. The magnet was designed to be assembled and tested in a surface hall, prior to be lowered at 90 m below ground, to its final position in the experimental cavern. The distinctive feature of the cold mass is the four-layer winding, made from a reinforced and stabilized NbTi conductor. The design and construction was carried out by CMS participating institutes through technical and contractual endeavors. Among them CEA Saclay, INFN Genova, ETH Zurich, Fermilab, ITEP Moscow, University of Wisconsin and CERN. The construction of the CMS Magnet, and of the coil in particular, has been completed last year. The magnet has just been powered to full field achieving electrical commissioning. After a brief reminder of the design and construction the first results of the commissioning are reported in this paper.
Добавил в систему: Клюхин Вячеслав Иванович

	ИСТИНА	Войти в систему Регистрация
	ИПМех РАН
	Главная Поиск Статистика О проекте Помощь

ИСТИНА

ИПМех РАН

Commissioning of the CMS magnetстатья

Прикрепленные файлы