Выберите категорию обращения:
Общие вопросы
Отчеты
Рейтинги
Мониторинговый отчёт
Диссертационные советы
Конкурсы
Ввод данных
Структура организаций
Аспирантура
Научное оборудование
Импорт педагогической нагрузки
Журналы и импакт-факторы
Тема обращения:
Описание проблемы:
Введите почтовый адрес:
ИСТИНА
Войти в систему
Регистрация
ИПМех РАН
Главная
Поиск
Статистика
О проекте
Помощь
Thermal effect of explosive detonation products on a flyer plate in the explosive welding of metals
статья
Статья опубликована в высокорейтинговом журнале
Статья опубликована в журнале из списка Web of Science и/или Scopus
Авторы:
Khaustov S.V.
,
Pai V.V.
,
Lukyanov Y.L.
,
Lysak V.I.
,
Kuz’min S.V.
Журнал:
International Journal of Heat and Mass Transfer
Том:
163
Год издания:
2020
Издательство:
Pergamon Press Ltd.
Местоположение издательства:
United Kingdom
DOI:
10.1016/j.ijheatmasstransfer.2020.120469
Аннотация:
In this study, a combined simulation and experimental method is suggested to determine the heat flow rate produced by detonation products with a planar thermocouple battery placed inside the test medium. A series of experiments was conducted to measure the temperature of products produced by the detonation of ammonite mixed with quartz sand, sodium bicarbonate, and talc over a detonation velocity range of 2–2.8 km/s. By solving the inverse heat conduction problem, we can obtain a time dependent relation for heat transfer from the detonation products to the flyer plate. It is shown that the temperature of the detonation products in the mixtures and the maximum heat flow to the flyer plate rise with an increase in the detonation rate. A quantitative evaluation of heat transfer to the flyer plate by the explosive detonation products is conducted. It is demonstrated that when thin plates (foils) are used as flyer plates, a preheating of the contact area of the colliding components occurs. © 2020
Добавил в систему:
Кузьмин Сергей Викторович