|
ИСТИНА |
Войти в систему Регистрация |
ИПМех РАН |
||
Fabrication of porous silicon nitride ceramics using binder jetting technologyстатья
- Авторы: Rabinskiy L., Ripetsky A., Sitnikov S., Solyaev Y., Kahramanov R.
- Сборник: IOP Conference Series
- Серия: Materials Science and Engineering
- Том: 140
- Год издания: 2016
- Издательство: Institute of Physics Publishing.
- Местоположение издательства: Bristol, England
- Номер статьи: 012023
- DOI: 10.1088/1757-899X/140/1/012023
- Аннотация: This paper presents the results of the binder jetting technology application for the processing of the Si3N4-based ceramics. The difference of the developed technology from analogues used for additive manufacturing of silicon nitride ceramics is a method of the separate deposition of the mineral powder and binder without direct injection of suspensions/slurries. It is assumed that such approach allows reducing the technology complexity and simplifying the process of the feedstock preparation, including the simplification of the composite materials production. The binders based on methyl ester of acrylic acid with polyurethane and modified starch were studied. At this stage of the investigations, the technology of green body's fabrication is implemented using a standard HP cartridge mounted on the robotic arm. For the coordinated operation of the cartridge and robot the specially developed software was used. Obtained green bodies of silicon powder were used to produce the ceramic samples via reaction sintering. The results of study of ceramics samples microstructure and composition are presented. Sintered ceramics are characterized by fibrous α-Si3N4 structure and porosity up to 70%.
- Добавил в систему: Соляев Юрий Олегович