Аннотация:CFD modelling of heat-and-mass transfer in metal hydride (MH) beds is an important step in the development and optimisation of MH reactors for hydrogen storage, compression and separation/purification. In the existing models, the mass conservation equation includes the density of solid in the non-hydrogenated (ρs) and hydrogensaturated (ρss) states. To provide constant porosity of the MH bed during H2 absorption/desorption, assumption ρs<ρss is typically taken. However, this assumption contradicts to well-known fact that hydrogenation of hydrideformingalloys is accompanied by the expansion of crystal lattice of the metallic matrix and, therefore, by the decrease of the solid density by 15–25%.This work presents results of the modelling which takes this effect into account. The model assumes that the density of the MH changes linearly as the starting hydride-forming alloy is saturated with hydrogen, while the volume of the MH bed remains constant. The last assumption is a limiting estimation because it provides the maximum possible reduction in the porosity during H2 absorption process.The model was validated using published experimental data on a cylindrical MH reactor filled with 422 g of LaNi5. It was shown that accounting the realistic changes in the MH density can significantly affect the simulation results.